Semistable measures and limit theorems on real andp-adic groups

For any locally compact groupG, we show that any locally tight homomorphism from a real directed semigroup intoM ¹ (G) (semigroup of probability measures onG) has a shift which extends to a continuous one-parameter semigroup. IfG is ap-adic algebraic group then the above holds even iff is not locally tight. These results are applied to give sufficient conditions for embeddability of some translate of limits of sequences of the form {v _n ^kn } and M ¹ (G) such that ()= ^M , for somek>1 and AutG (cf. Theorems 2.1, 2.4, 3.7).     

Enantioselective transacetylation of (R,S)-β-citronellol by propanol rinsed immobilized Rhizomucor miehei lipase

Background  

Use of enzymes in low water media is now widely used for synthesis and kinetic resolution of organic compounds. The frequently used enzyme form is the freeze-dried powders. It has been shown earlier that removal of water molecules from enzyme by rinsing with n-propanol gives preparation (PREP) which show higher activity in low water media. The present work evaluates PREP of the lipase (from Rhizomucor miehei) for kinetic resolution of (R,S)-β-citronellol. The acylating agent was vinyl acetate and the reaction was carried out in solvent free media.     

Validation of LC/MS electrospray ionisation method for the estimation of ursodiol in human plasma and its application in bioequivalence study

A novel High Performance Liquid Chromatography-electrospray mass spectrometric method has been developed for the estimation of Ursodiol (Ursodeoxycholic acid)--a bile acid, in human plasma using Ornidazole as internal standard. The methodology involved solid phase extraction of the analyte from human plasma matrix. The chromatographic separation was achieved within seven minutes by an isocratic mobile phase containing 1.0 mM ammonium acetate and Acetonitrile (65:35, v/v), flowing through XTerra MS C18, 100 x 2.1, 3.5 microm analytical column, at a flow rate of 0.2 ml/min. Ion signals were measured in negative mode for Ursodiol and internal standard at m/z 391.3 and 278.1, respectively. A detailed validation of the method was performed as per USFDA guidelines and the standard curves were found to be linear in the range 50.0 ng/ml to 3000.0 ng/ml with the mean correlation coefficient more than 0.99. The absolute recovery was more than 54.90% for Ursodiol and 76.51% for internal standard. Ursodiol was stable for sixty-nine days at -70 degrees C and for eight hours at ambient temperature. After extraction from plasma, the reconstituted samples of Ursodiol were stable in autosampler at 10 degrees C for forty-eight hours. Upon subjecting to three freeze thaw cycles, there was no change in the recovery of the analyte. The integrity of the plasma samples remained unaffected even upon four-fold dilution with drug free human plasma. The method was simple, specific, sensitive, precise, accurate and suitable for bioequivalence and pharmacokinetic studies. It was successfully applied to the pilot bioequivalence study of Ursodiol in male human subjects.     

Preprocessing of rotamers for protein design calculations

We have developed a process that significantly reduces the number of rotamers in computational protein design calculations. This process, which we call Vegas, results in dramatic computational performance increases when used with algorithms based on the dead-end elimination (DEE) theorem. Vegas estimates the energy of each rotamer at each position by fixing each rotamer in turn and utilizing various search algorithms to optimize the remaining positions. Algorithms used for this context specific optimization can include Monte Carlo, self-consistent mean field, and the evaluation of an expression that generates a lower bound energy for the fixed rotamer. Rotamers with energies above a user-defined cutoff value are eliminated. We found that using Vegas to preprocess rotamers significantly reduced the calculation time of subsequent DEE-based algorithms while retaining the global minimum energy conformation. For a full boundary design of a 51 amino acid fragment of engrailed homeodomain, the total calculation time was reduced by 12-fold.     

Copolymers and two-layered composites of poly(<Emphasis Type="Italic">o</Emphasis>-aminophenol) and polyaniline

Electroactive conducting copolymers of aniline (ANI) and o-aminophenol (OAP) and two-layered poly(o-aminophenol) (POAP)/polyaniline (PANI) composites were prepared in aqueous acidic solution by electrode potential cycling. Copolymerization was carried out at different feed concentrations of OAP and ANI on a gold electrode. A strong inhibition of electropolymerization was found at a high molar fraction of OAP in the feed. The copolymers showed good adherence on the electrode surface and gave a redox response up to pH=10.0. Two transitions were observed in the in situ conductivities of the copolymers (as with PANI), but the conductivities were lower by 2.5–3 orders of magnitude as compared to PANI. Electrosynthesis of PANI on POAP modified electrodes showed copolymer formation after reaction initiation and finally formation of a PANI layer at the copolymer/solution interface. The ‘memory effect’ of the bilayer structures of both polymers was discussed in terms of protonation/deprotonation and anion consumption taking place during redox processes of both polymers.     

Steric Stabilization of Colloids by Poly(dimethylsiloxane) in Carbon Dioxide: Effect of Cosolvents

Steric stabilization and flocculation of colloids with surface-grafted poly(dimethylsiloxane) (PDMS) chains are examined in liquid and supercritical carbon dioxide with and without hexane as a cosolvent. Neither poly(methyl methacrylate) (PMMA) nor silica particles with grafted 10,000 g/mol PDMS could be stabilized in pure CO(2) at pressures up to 345 bar at 25 degrees C and 517 bar at 65 degrees C without stirring. The addition of 15 wt% hexane to CO(2) led to stable dispersions with sedimentation velocities of 0.2 mm/min for 1-2 μm PMMA particles. The critical flocculation pressure of the colloids in the hexane/CO(2) mixture, determined from turbidity versus time measurements, was found to be the same for silica and PMMA particles and was well above the upper critical solution pressure for the PDMS-CO(2) system. The addition of a nonreactive cosolvent, hexane, eliminates flocculation of PMMA particles synthesized through dispersion polymerization in CO(2) with PDMS-based surfactants. Copyright 2000 Academic Press.     

The dielectric constant and salt effects upon the acid hydrolysis of ethyl formate

The hydrolysis of ethyl formate catalysed by hydrochloric acid was studied at three temperatures in water-acetone media and in water media containing different concentrations of sodium nitrate. The effect of various ionic strengths and dielectric constants upon the rate of acid hydrolysis of ethyl formate is presented from the point of electrostatics and the results were compared to like effects upon the acid hydrolysis of ethyl acetate and methyl propionate. Neither the dielectric constant effect nor the salt effect lends itself readily to theoretical interpretation. It was assumed that a partial explanation of these anomalous results might be in the extrapolation of the acid radical to the simplest carboxylic acid. This suggestion was supported somewhat by the trends towards less adherance to the electrostatic theory at certain temperatures in the series methyl propionate, ethyl acetate and ethyl formate.     

Importance of dynamic surface tension to the residual water content of fabrics

At the end of the final spin cycle of the laundry process, the residual moisture content (RMC) of fabric is directly related to the dynamic surface tension of the residual water in the fabric. The LaPlace equation for capillary rise predicts that the capillary rise of solutions in a capillary is proportional to the surface tension at the air-liquid interface. If fabric can be considered to be a large ensemble of capillaries due to interfiber spacing, then the RMC of fabrics will be directly related to the surface tension of residual solution in the fabric. The use of a tailored rinse additive has the potential to decrease the surface tension of solution significantly, thus leading to a decrease in the residual water content of the fabric. It is expected that as the surfactant concentration increases the surface tension decreases. Hence, the RMC of fabrics must decrease with increasing surfactant concentration. However, a peak is observed in the RMC of fabrics before the critical micelle concentration (CMC) is reached. Prior to the CMC, it is proposed that a sudden adsorption of surfactant is occurring on the fabric surface leading to a decrease in bulk monomer concentration. The decrease in free monomer concentration should result in an increase in the equilibrium surface tension of the residual solution leading to a concomitant increase in RMC. Because the dynamic surface tension is measured on a short time scale (on the order of milliseconds), there will be less adsorption of monomer onto the newly created air-liquid interface of the bubbles during the measurement process. This decrease in adsorption should lead to a pronounced increase in the dynamic surface tension. This indeed was observed. The RMC correlates very well with the dynamic surface tension of the residual solution.     

Automated continuous-flow determinations of serum proteins by pulse polarography

A new flow-through cell is described for application of the dropping mercury electrode to the determination of serum proteins in an automated continuous-flow system. By using differential pulse polarography with short controlled drop times, it is possible to run a rapid automated system at sampling rates of up to 120 per hour with approximately +/- 1% precision and less than 3% carry-over. With the Brdicka reagent, hexa-amminecobalt(III) chloride, various serum proteins can be determined in the range 5-50 mug/ml. The method therefore offers a rapid and sensitive automated procedure for determination of serum proteins.